Submerged Arc Welding Tractor

Submerged Arc Welding Tractor

Description

The main components

Single Machine List

CSAW-1000 The utility model can be used for the welding of the flat / corner joint and the cylinder of the tank, and can also be used for the longitudinal seam welding of the cylinder with a diameter larger than 800mm. The category of cars have multiple configurations to choose.

1)The magnetic adsorption component equipped with fillet welding, suitable for welding seam of tank bottom and feet;
2)The 3+1 wheel design unique, stable and use of both;
3)The walking worm drive, and equipped with clutch, convenient non welding state handling;
4)The grooved wheel, which can be used alone without rail; and can adapt to the angle of self-made track;
5)The United States is equipped with Miller welding system;
6)The equipment of infrared laser sight, convenient alignment of weld;
7) the wire diameter of 2.4mm~4.8mm;
8) butt and lap, broken wire and inside and outside the tank bottom welding seam feet.
LIST:
NAME:CSAW-1000 conner auto welding machine
MODLE: CSAW-1000
LIST:CSAW-1000 type automatic submerged arc welding machine for input 380V+10%/3PH/50Hz boxer, call, floor / feet seam welding construction.

NO

COMPOSITION

MANUFACTUER

QUA

REMARK






1

Automatic welding system

3+1 Wheel self walking car

WUXI ABK

1SET

CHINA

The torch position regulator
Torch angle trimmer
Flux hopper and lower material component
Infrared laser welding device
In / outside gap magnetic adsorption three piece



2


WELDING SYSTEM

DC1000 LINCOLN

USA

LINCOLN

1SET

Original

NA3 FEEDER
NA3 CONTROLLER





3




CABLE

WELDING CABLE(150mm2 x 60m x1)




1SET


CONTROL CABLE(2.5 mm2 x 10p x60m x 1)
ERATH(150mm2 x 5m x 1)
POWER CABLE(4mm2 x3p x60m x 1)
QUICK CONNECTOR


4


POWER RACK

CABINET

WUXI ABK

1SET


WELDING POWER FRAME

5

TOOLS

TOOLS

WUXI ABK

1SET

CHINA


Related Products